Crafted from forged steel that has been quenched and tempered, these hot-dip galvanized eye nuts offer exceptional strength and long-lasting durability. They comply with, and in many cases surpass the standards outlined in ASME B30.26.

California Residents: WARNING

Warning: Eye Bolts

Never exceed the maximum working load limit / load capacity. Doing so can result in product failure leading to injury or death.

When loading at angles, rated capacity is drastically reduced (for example, at 45 degrees, it’s reduced to 1/4 of the original value).

The angle from the bolt centerline should never be greater than 45 degrees.

Always apply loads in the plane of the eye.

Ensure proper seating for shoulder lifting eyes before use, otherwise the working load limit will be reduced. If it does not bear firmly against the mating part, a steel washer or spacer may be required.